| S U G A R I N D U S T R Y A P P L I C A T I O N S | ||
| s | ||
| [Cement] [Sugar] [Power & Coal] [Railways] | ||
| [Paper & Pulp] [Transport] [Ports] [Forging] | ||
| [Foundry] & [Others] | ||
| s | ||
|
Cane Grab: Used in lifting cane from truck, tractor, etc and placing on unloading tray. The base metal is of Cast Steel. Wear Factor: Abrasion |
 |
|
| s | ||
 |
Cane Pusher Arms/Cane Kicker: Used in pushing cane forward towards Cane-Leveller. The base metal is of Medium Carbon Steel. Wear Factor: Abrasion |
|
| s | ||
|
Lateral Carrier Gear: Used in transmission of rotary motion to carrier chain. The base metal is alloy steel. Wear Factor: Abrasion |
 |
|
| s | ||
 |
Inter Carrier Shaft: The chain sprockets are fitted on this. The base metal is alloy steel. Wear Factor: Friction |
|
| s | ||
|
Underfeed Roller: Fibrized cane is feeded by Underfeed Roller to top roller. The base metal is of Mild Steel / Stainless Steel. Wear Factor: Abrasion & Corrosion ; Product Recommended: XL-W58 |
 |
|
| s | ||
 |
Roller Journal: Used in crushing the sugarcane and extracting juice. The base metal is of Alloy Steel. Wear Factor: Friction & Corrosion ; Product Recommended: XL-18 / XL-SPL |
|
| s | ||
|
Crusher Roller Arcing: Arcing is done to decrease width between two roller teeths and to increase crushing efficiency. The base metal is of Cast Steel or Cast Iron. Wear Factor: Friction, Corrosion & Abrasion |
 |
|
| s | ||
 |
Fibrizer Hub / Shredder Hub / Mincer Hub: The hammers are fitted in Hub. The base metal is of Cast Steel. Wear Factor: Abrasion, Corrosion & Mild Impact; Product Recommended: XL-W58 |
|
| s | ||
|
Hammer Stock Bar: The Bar between Hub and Hammer Block. The base metal is of Alloy Steel. Wear Factor: Abrasion, Corrosion & Mild Impact; Product Recommended: XL-W58 |
 |
|
| s | ||
 |
Anvil: It gives the back-up support to Hammers for cane fibrizing. The base metal is of Carbon Steel. Wear Factor: Abrasion, Corrosion & Mild Impact; Product Recommended: XL-W58 |
|
| s | ||
|
Chain Sprocket: It gives the back-up support to Hammers for cane fibrizing. The base metal is of Carbon Steel. Wear Factor: Abrasion, Corrosion & Mild Impact; Product Recommended: XL-W58 |
 |
|
| s | ||
| If require any technical assistance or solution for a never ending problems in this context please contact our technical experts. | ||